Efficient Solutions to Resolve ‘Preparing Automatic Repair’ Issue in Windows 10

How to Fix “Preparing Automatic Repair Windows 10”

If you’re encountering the frustrating “Preparing Automatic Repair Windows 10” error message, you’re not alone. This issue can arise due to various reasons, such as corrupted system files, hardware problems, or even a faulty installation. However, don’t worry; there are several effective methods to fix this problem and get your Windows 10 system up and running smoothly again. In this article, we will guide you through the steps to resolve the “Preparing Automatic Repair Windows 10” error and restore your system to its normal functioning state.

Method 1: Restart Your Computer

The simplest solution to many computer-related issues is often to restart your device. Sometimes, the “Preparing Automatic Repair Windows 10” error can be a temporary glitch that gets resolved by simply restarting your computer. Follow these steps:

1. Press the power button on your computer to turn it off.
2. Wait for a few seconds, then press the power button again to turn it on.
3. Allow your computer to boot up normally.

If the error persists, proceed to the next method.

Method 2: Run System File Checker

The System File Checker is a built-in Windows tool that scans and repairs corrupted system files. To run the System File Checker, follow these steps:

1. Press the Windows key + X and select “Command Prompt (Admin)” or “Windows PowerShell (Admin)” from the list.
2. In the Command Prompt or PowerShell window, type “sfc /scannow” and press Enter.
3. Wait for the process to complete. It may take some time, depending on the size of your system files.
4. Once the process is finished, restart your computer and check if the error is resolved.

Method 3: Use DISM Tool

The Deployment Image Servicing and Management (DISM) tool is another built-in Windows tool that can help fix corrupted system files. To use DISM, follow these steps:

1. Open Command Prompt (Admin) or Windows PowerShell (Admin) as described in Method 2.
2. In the Command Prompt or PowerShell window, type the following commands one by one and press Enter after each command:

“`
DISM /Online /Cleanup-Image /CheckHealth
DISM /Online /Cleanup-Image /ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
“`

3. Wait for the process to complete. It may take some time, depending on the size of your system files.
4. Restart your computer and check if the error is resolved.

Method 4: Reset Your PC

If the above methods don’t work, you can try resetting your PC to restore it to its factory settings. This will erase all your personal files, so make sure to back up any important data before proceeding. To reset your PC, follow these steps:

1. Press the Windows key + I to open Settings.
2. Click on “Update & Security” > “Recovery.”
3. Under the “Reset this PC” section, click on “Get started.”
4. Choose whether you want to keep your files or remove everything.
5. Follow the on-screen instructions to complete the reset process.

Method 5: Perform a Clean Install

If all else fails, you may need to perform a clean install of Windows 10. This will erase all your data and settings, so make sure to back up any important files before proceeding. To perform a clean install, follow these steps:

1. Create a Windows 10 installation media using the Media Creation Tool.
2. Boot your computer from the installation media.
3. Follow the on-screen instructions to install Windows 10.
4. After the installation is complete, restore your backed-up files and settings.

By following these methods, you should be able to fix the “Preparing Automatic Repair Windows 10” error and get your Windows 10 system back to normal. If you encounter any issues or have further questions, feel free to leave a comment below.